Led Displays - Festo CPX-FB33 Operating Instructions Manual

Product overview
Function
PROFIenergy
Media Redundancy Protocol
(MRP)
Media Redundancy for Planned
Duplication (MRPD)
S2 system redundancy
Isochronous real time (IRT)
Message Queuing Telemetry
Transport (MQTT)
Tab. 3: Required revision numbers for using the functions
The bus nodes CPX(-M)-FB33/34/35 do not support MQTT.
The revision numbers of the hardware and software for the bus node can be checked with the control
software, the Festo Maintenance Tool (FMT) or the Festo Field Device Tool (FFT).
4.2.3

LED displays

LED Network status LEDs
NF Network Failure, red
M/P Maintenance/PROFIenergy,
green or yellow
TP1 Link/Traffic 1, green
TP2 Link/Traffic 2, green
Tab. 4: LEDs on the bus node
8
Bus bus node revision number
Software
from Rev 20
from Rev 20
from Rev 50
from Rev 50
from Rev 21
from Rev 53
LED
Festo — CPX(-M)-FB33/34/35/43/44/45 — 2022-05f
Hardware
from Rev 1
from Rev 1
from Rev 45
from Rev 45
from Rev 1
from Rev 45
CPX-specific LEDs
PS Power System, green
PL Power Load, green
SF System Failure, red
M Modify, yellow