Network - Festo CPX-FB33 Operating Instructions Manual

Technical data
10.2

Network

Characteristics
Network protocol
Selection of supported protocol
characteristics and protocol
functions
Selection of supported CPX
properties and CPX functions
Specification
Transmission technology
Tab. 29: General network characteristics
Characteristics
Transmission rate
Wavelength
Festo — CPX(-M)-FB33/34/35/43/44/45 — 2022-05f
Bus node
PROFINET IO (PN IO):
– Based on Industrial Ethernet
– Based on the standard Ethernet protocol IEEE 802.3
– Cyclical data exchange "in real-time", without isochronous
mode (Real-Time, RT) or over LAN with isochronous mode (Iso-
chronous Real Time, IRT)
– Link Layer Discovery Protocol (LLDP)
– Simple Network Management Protocol (SNMP)
– Fast Start-up (FSU)
– PROFIenergy
– PROFIsafe
– Shared Device
– Media Redundancy Protocol (MRP, MRPD)
– S2 system redundancy
– CPX-terminal configuration via CPX-FMT
– CPX terminal diagnostics via fieldbus communication and the
control system
– Web server functionality:
Representation of the PROFINET network structure, CPX ter-
minal configuration with diagnostic information, PROFINET I&M
data, Ethernet statistics, MQTT configuration
Selection of directives and standards with reference to PROFINET:
– PROFINET installation guidelines: PROFINET Installation Guide,
Installation Guideline PROFINET Part 2 ...
– IEC 61158
– IEC 61784
– IEC 61918
Additional information:
è www.profinet.com
è www.profibus.com
Switched Fast Ethernet;
100BaseTX execution in accordance with IEEE 802.3
CPX-FB33/43
100 Mbit/s
–
CPX-M-FB34/44
100 Mbit/s
–
CPX-M-FB35/45
100 Mbit/s
650 nm, suitable for
POF fibre-optic cable
37