Installation; General Information About Installation; Connecting To The Network; Ensuring The Degree Of Protection - Festo CPX-FB33 Operating Instructions Manual

Installation

6 Installation
6.1

General information about installation

Comply with the handling specifications for electrostatically sensitive devices.
Information on mounting the CPX terminal can be found in the CPX system description CPX-SYS-....
6.2

Connecting to the network

Installation guidelines
Observe the installation guidelines of the PROFINET user organisation (PNO):
è www.profibus.com
NOTICE
Unauthorised Access to the Device Can Cause Damage or Malfunction.
• When connecting the device to a network, protect the network from unauthorised access.
Standards for security in information technology can be used for network protection measures, e.g.
IEC 62443, ISO/IEC 27001.
An access password only protects against unintentional modification.
For additional information è Guidelines and standards for security in information technology, e. g.
IEC 62443, ISO/IEC 27001.
Use of switches and routers
The switch integrated in the bus node enables division of the network into several segments.
The network can be divided into additional segments with the use of additional switches and routers.
This makes it possible to structure the network and expand the network.
Regardless of the network structure, the expansion of a PROFINET segment must not exceed certain
connection lengths:
– Copper connecting cable, Ethernet twisted pair cable, 22 AWG:
max. 100 m between network participants, PROFINET end-to-end link
– Optical connecting cable, POF fibre-optic cable, max. 12.5 dB signal attenuation over the entire
connecting section:
max. 50 m PROFINET end-to-end link.
6.3

Ensuring the degree of protection

– Use connection hardware with the required degree of protection.
– Use cover caps to seal unused connections.
14 Festo — CPX(-M)-FB33/34/35/43/44/45 — 2022-05f