Deleting Events That Have Been Viewed; System Events When Starting; Security Event List; Reset Latching Relays - ABB RELION REB500 Operation Manual

Section 4
HMI500
4.5.8.6

Deleting events that have been viewed

All the protection events viewed since opening the window are deleted.
4.5.8.7

System events when starting

A number of system signals that are generated when starting the system are recorded as events. Up to
the instant that system clocks are automatically synchronized, events may have an incorrect date and
time. These events are not displayed if Only events with a valid time tag is selected.
4.5.9

Security event list

It is possible to upload the security events stored on the protection system devices. The security events
can be uploaded by using the Refresh button or using the Update cyclically button to get the data every
four seconds from the target device. For details see Cyber security guideline.
4.5.10

Reset latching relays

All latched signals are reset and the corresponding display on the local control unit is deleted.
IEC18000501 V1 EN-US
Figure 20:
4.6

Configuration menu

Menu Item
Communication
Device structure
Binary inputs/ outputs
Table continues on next page
32
Reset latching relays
See section
4.6.1
4.6.2
4.6.3
© 2020 - 2022 Hitachi Energy. All rights reserved
GUID-813EA8CE-1752-4529-818B-6B3588D3133B v1
GUID-356B984A-1051-45DC-B9BF-951C29388AA3 v1
GUID-2DE6F2AF-E129-4CC8-90EE-BF2CFEA30958 v1
GUID-8F441EB0-E92A-417A-959C-A3EAB5927F77 v1
12000093-IEC18000501-1-en.vsdx
GUID-736A1325-34F6-4CFD-9762-6FFC2226C0FE v2
Description
Providing the communication option is selected, the
protection system can be connected with a station
automation system (SAS) or station monitoring system
(SMS) via an interbay bus (IBB) connection.
Opens a new window that gives an overview of the
configured devices with its details.
Used to configure the binary inputs/outputs while
engineering the protection system. The data entered
are normally provided in the questionnaire filled in by
the user. This dialog has three tabs: Overview, Inputs,
and Outputs.
Distributed busbar protection REB500
1MRK 500 132-UUS Rev. B
Operation manual