File Menu - ABB RELION REB500 Operation Manual

1MRK 500 132-UUS Rev. B
Table 3:
Field
1
2
3
4
5
6
7
8
4.4

File menu

Table 4 summarizes the options available in this menu. The subsequent subsections describe the menu
items Download to protection system... and Compare... in greater detail.
Table 4:
Menu Item
Open...
Save as...
Upload from protection system...
Download to protection system...
Compare...
Exit
Distributed busbar protection REB500
Operation manual
Status bar content
Content Description
Configurator Indicates that configurator mode is active (no target
communication possible).
Operator Indicates that operator mode is active (target communication
possible).
Online Successfully established contact with the protection system.
Offline No connection to protection system.
Simulation All the functions can be executed without being connected to a
protection device. Random values are generated when viewing
protection unit data, for example, event lists or measurements.
Simulated faults can also be viewed.
HMI: [IP:Port] Active Ethernet interface (on the device front), the IP address
and the port connected for the target communication.
LAN0: [IP:Port] Active Ethernet interface communication over station bus, the IP
address and the port connected for the target communication.
Edit Permits settings to be saved in a file or downloaded to the
protection system.
Read-Only It is only possible to read data.
Test Test generator is activated.
Test generator not active.
Install Installation mode is active (debug mode is inactive).
Install/Debug Installation mode and Debug mode are active.
Debug Debug mode is active (Installation mode is inactive).
<Setfile> Path and name of the currently open setfile.
<action> Short message of an ongoing action.
Menu items in menu file
Description
Opens a database file stored on the computer's file system.
Saves the currently open database to the computer's file system.
Saves a database from the protection system to the computer's
file system.
Sends a database file from the computer's file system to the
protection system.
Compares a database file on the computer's file system to the
database of the protection system or to another database file on
the computer's file system.
Terminates the program; displays a warning if there are changes
that have not been saved. You then have the choice of saving or
discarding them.
© 2020 - 2022 Hitachi Energy. All rights reserved
Section 4
HMI500
GUID-F240B0E9-E0C6-4FF3-879A-F9F0A88B2F16 v1
15