New Signal - ABB RELION REB500 Operation Manual

Section 4
HMI500
IEC18000510 V1 EN-US
Figure 48:
IEC18000511 V1 EN-US
Figure 49:
Under the Status LED on LMI dialog box, the number of the LED on the LMI is given in the ID column.
4.6.7.1

New signal

A LED is assigned to a signal by marking it in the dialog and clicking on New signal or alternatively by
double-clicking on the LED line. A list of possible signals is then presented to enable one to be chosen.
Several signals can be assigned to one LED. Then the LED reflects the state of configured signals
(combined in an OR function).
60
LMI LED configuration (List of units/ Print dialog box)
Status LED on the LMI (LED Configuration dialog box)
© 2020 - 2022 Hitachi Energy. All rights reserved
1MRK 500 132-UUS Rev. B
12000118-IEC18000510-1-en.vsdx
12000119-IEC18000511-1-en.vsdx
GUID-ECF1D0AC-8EB2-4673-9716-A59622A57235 v3
Distributed busbar protection REB500
Operation manual