Window Structure - ABB RELION REB500 Operation Manual

1MRK 500 132-UUS Rev. B
HMI500 obtains the specific device data from a database in a file, which is stored both in the PC and the
protection system. Database files on the PC have the extension .mdb.
Click OK to continue start-up or Cancel to close the program.
When you click OK, HMI500 tests communication with the protection system and starts in the on-line
mode if communication can be established. Otherwise it starts either in off-line or simulation mode (see
Section 4.9.5).
Some of the dialogs used by the program are standard Windows dialogs, whose language depends on
the language setting of the operating system.
4.3.4

Window structure

The structure and handling of the windows in the operator program is similar to other Windows
applications.
IEC18000289 V1 EN-US
Figure 3:
Table 1 summarizes the meaning of buttons that appear in many dialog boxes:
Table 1:
Button
OK
Apply
Restore
Cancel
Scroll (arrow) buttons
Close
Distributed busbar protection REB500
Operation manual
When the HMI500 software establishes communication with a REB500 system initially
user must enter a password.
For details about security management, passwords, and security options, see Cyber
security Deployment Guideline.
The database that was open during the last session opens automatically. If no database
was open before, select Open in the File menu and then the desired file. An error
message is displayed if an attempt is made to open an incompatible file. An existing file
in the protection system can also be opened using the Upload function in the File menu.
Dialog box buttons
Meaning of common buttons in dialogs
Description
The new settings are saved in the database on the PC and the dialog
closes.
The new settings are saved in the database on the PC and the dialog
stays open.
The changes that have been made are ignored and the old settings
restored. The dialog stays open.
The new settings are not saved and the dialog closes.
In windows permitting the selection of several bays (or disconnectors,
circuit breakers etc.), there are four scroll buttons at the bottom for
scrolling through the bays.
The window or dialog is closed and a warning is displayed, if changes
have been made which have not been saved.
© 2020 - 2022 Hitachi Energy. All rights reserved
GUID-AC8B4D07-B8FC-4B74-85A2-603E6A6BC7B4 v3
12000072-IEC18000289-1-en.vsdx
Section 4
HMI500
13