Goose Input Mapping - ABB RELION REB500 Operation Manual

Section 4
HMI500
4.6.4.6

GOOSE input mapping

This section describes the configuration process of GOOSE input mapping in HMI500 menu
Configuration /Binary Module/Inputs /Details.
IEC18000562 V1 EN-US
Figure 41:
Table 11:
Menu Items
Assigned GOOSE data
Attribute
Selection – Unassigned
GOOSE data Attributes
Selection – Assign
Selection – Deassign
Selection – GOOSE data
attribute filter
IEC18000558 V1 EN-US
Figure 42:
52
To simplify GOOSE engineering in REB500, the import of GOOSE signals is limited to
specific logical nodes (for example, PTRC).
Configuration/ Binary module/ Inputs/ Details/ Contact mode – GOOSE Input
GOOSE Input menu items
Description
If a REB500 Signal has assigned to a GOOSE data attribute then the
name of the attribute is listed in this field.
List of GOOSE data attributes which can be assigned to the selected
Input signal. See
Confirms the mapping of the selected attribute to the REB500 Signal.
The Assign button is enabled after the Station configuration file (SCD)
has been imported.
Breaks the connection between the GOOSE data attribute and the
REB500 input signal. The GOOSE data attribute can be assigned to
another REB500 Signal.
See Table
Configuration/ Binary module/ Inputs/ Details/ Contact mode/ GOOSE Input -
Selection
© 2020 - 2022 Hitachi Energy. All rights reserved
Figure 42.
12.
1MRK 500 132-UUS Rev. B
GUID-412DEE24-DC4A-4536-9699-43BC440EBEC2 v2
15000042-IEC18000562-1-en.vsdx
15000038-IEC18000558-1-en.vsdx
Distributed busbar protection REB500
Operation manual