Settings; Hmi500 Settings; Communication; Parameters For Reading And Exporting Event Data - ABB RELION REB500 Operation Manual

Section 4
HMI500
4.9.5

Settings

4.9.5.1

HMI500 settings

Some of the operator program functions can be customized.
IEC18000505 V1 EN-US
Figure 62:
4.9.5.2

Communication

Communication can be established with a REB500 system either via HMI front connector or via the
station bus.
Settings are provided for the TCP/IP address of the REB system to which communication is being
established.
It is possible to change between the communication modes On-line, Off-line and Simulation. Selecting
On-line causes HMI500 to check whether communication with REB500 system can be established.
The check box Enable security menu and its influence to the sub-menus Tools /Security option and
Tools/Security account management is described under Cyber security deployment guideline.
4.9.5.3

Parameters for reading and exporting event data

Settings are provided for the period for cyclically reading events and the separator for an ASCII file when
exporting events.
4.9.5.4

Database locations

HMI500 creates a number of configuration databases. The following dialog provides facility for defining
the directories where the databases are located and changing the database names. Default directories
are created during the installation of HMI500 and it is recommended that these not be changed.
74
HMI500 settings
© 2020 - 2022 Hitachi Energy. All rights reserved
1MRK 500 132-UUS Rev. B
GUID-DB508E6C-93A9-4A69-B7AB-1B49379BD4CD v1
GUID-9430004F-C808-43F7-8AFE-A21685142EFE v1
12000102-IEC18000505-1-en.vsdx
GUID-6B90A07B-BF93-4955-BB12-855A76CEDECD v2
GUID-2152C397-2F40-447E-B247-0229606E0B95 v1
GUID-71F77D63-F87E-42E8-9B78-3A531EFA10E3 v1
Distributed busbar protection REB500
Operation manual