Preface
Do I have AC500 V2 or AC500 V3?
—
1 Preface
1.1 Guidance through the documentations
Where to find information about:
●
PLC system
–
–
–
–
●
Devices
–
–
–
–
–
●
Software and programming
–
–
–
–
–
1.2 Do I have AC500 V2 or AC500 V3?
This document describes AC500 V3 products.
We offer different ranges of the processor modules (V2, V3). You can easily find out which ones
are used in your system. Either have a look at your used modules or your configuration.
Fig. 1: Hardware: Processor modules
Written type on the module
Processor module type PM +
3 digits
Processor module type PM +
4 digits
4
System description
Ä Chapter 3 "System overview" on page 12
Getting started: First steps with the platform and create your first program
Starter kit: Introduction into PLC programming using pre-installed kits, including creation
of control panel visualization
Safety user manual for safety PLCs
Data sheets
Installation instructions
PLC hardware descriptions
Safety user manual for safety PLCs
Control panels
Engineering suite Automation Builder
Programming examples for download
Programming examples available in engineering suite: Open Automation Builder menu
"Help è Project examples"
Application descriptions for specific features and use cases
Release notes for the latest version of the engineering suite Automation Builder
3ADR011074, 1, en_US
Example
Range
PM595
V2
PM5670
V3
Relevant manual
AC500 V2
AC500 V3 (this manual)
2023/03/03