Disturbance Recorder - ABB RELION REB500 Operation Manual

Distributed busbar protection

Hide thumbs Also See for RELION REB500:

Table of Contents

Section 4

HMI500

IEC18000496 V1 EN-US

Figure 15:

These circuit breakers are intertripped, for example, in the event of a busbar fault in the respective

protection zone.

4.5.7

Disturbance recorder

A disturbance recorder is integrated in every bay unit and in the central unit of the system. In the bay

units, it records the current measurements, the voltage measurements and up to 32 binary input and

output signals. In the central unit, it records the differential and the restraint currents and optional the

phase differences of every bus zone and up to 32 binary output signals. Up to 40 recording periods are

supported (depending on the selected sample rate and recording time).

Protection zone circuit breakers, detailed view

1MRK 500 132-UUS Rev. B

12000087-IEC18000496-1-en.vsdx

GUID-2210794F-CB7C-4047-B17D-9CDA89275198 v2

Distributed busbar protection REB500

Operation manual

Table of Contents