Figure 9: Central Fuse Assembly And Fuse Being Withdrawn; Figure 10: Fuse Canister After Fuse Assembly And Fuse Have Been Removed - ABB SafeLink Installation And Operating Instructions Manual

abb
SLMIO ver 2.12
3. Pull the red handle on the front of the
canister fully downwards. This will
allow the fuse assembly to be
removed.
4. Release the fuse from the fuse
assembly with a screwdriver.
5. Fit the new fuse into fuse assembly
and tighten clamp. Carefully refit the
fuse and fuse assembly into the
canister. Do not overtighten the clamp
screw.
ABB Ltd, Switchgear Division, Auckland, New Zealand
SF Insulated Ring Main Unit
6
Installation and Operating Instructions
Figure 9: Central fuse assembly and fuse being
withdrawn.
Figure 10: Fuse canister after fuse assembly and
fuse have been removed.
SafeLink
9