ABB RELION REB500 Operation Manual page 25

1MRK 500 132-UUS Rev. B
ANSI18000489 V1 EN-US
Figure 8:
The name of every item of a plant can be changed by pointing at its symbol and clicking the right mouse
button. This opens the Change label context menu to open the corresponding dialog box. After entering
the new name, click OK to confirm.
Click the button Update Status or Update Cyclically to show the actual bay measurements and the
state symbols of the configured breakers and disconnectors.
It is also possible to display the differential currents of the selected busbar zone. Point on the end of a
busbar zone (for example, BZ1) and click the right mouse button to get the corresponding context menu.
Click the right mouse button in an empty field in the single-line diagram to view a dialog with a list of the
symbols used (see
open, closed or invalid objects to suit your needs.
Distributed busbar protection REB500
Operation manual
Typical Single-line diagram
Figure 9). The buttons on the right provide facility for changing the default colors for
© 2020 - 2022 Hitachi Energy. All rights reserved
Section 4
HMI500
19