Section 4
HMI500
4.6.4.4
Export IID/CID file
The configuration file which is passed to the system configuration tool can be created from the Tools/
Export SCS data menu. The Export button starts the export.
IEC18000559 V1 EN-US
Figure 37:
A successful export is indicated by the SCS data exported message box. Additionally the location of the
configuration file is shown.
IEC18000561 V1 EN-US
Figure 38:
4.6.4.5
Import GOOSE attributes
The Configuration /SCS Configuration/IEC 61850-8-1 options /Import GOOSE data attributes button
opens a file open dialog box. It is used to select the Station Configuration File (SCD), which has been
created by a system engineering tool. GOOSE data attributes, which can be mapped to REB500 signals,
are imported from the Station Configuration File.
50
Tools/ Export SCS data
SCS Data exported
© 2020 - 2022 Hitachi Energy. All rights reserved
1MRK 500 132-UUS Rev. B
GUID-44D7F50A-519B-4ADB-862E-DE6586E90D3B v1
15000039-IEC18000559-1-en.vsdx
15000041-IEC18000561-1-en.vsdx
GUID-510EC409-7A10-4F0D-8755-67B3F52D941B v2
Distributed busbar protection REB500
Operation manual