Preparations For Starting Up - WAGNER GA 4000ACIC-R Translation Of The Original Operating Manual

VERSION 06/2013
OPERATING MANUAL
6.3.2

PREPARATIONS FOR STARTING UP

1. Mount the spray gun on the reciprocator.
2. Connect product hoses (supply and return) to spray gun and product supply system.
3. Fit nozzle on nozzle seal. Fit air cap over nozzle.
Note the fl attened parts (X) on the nozzle and in the air cap.
Fit the air union nut and tighten by hand.
4. Connect control air hose and atomizing air hose to spray gun and to oil-free, dry air
supply.
5. Visually check the permissible pressures for all the system components.
6. Make sure that the device and all other conductive parts within the work area are
grounded.
7. Set operating pressure to 100 MPa; 10 bar; 1450 psi and use a suitable medium to
check no connections are leaking.
8. Relieve spray gun and device pressure.
ORDER NUMBER DOC 2312956
X
B_03071
33