Alpha ESS Storion-SMILE5 Installation, Operation & Maintenance Manual page 57

Step 16: If you use CT meter, please set CT
meter enable and the relevant ration
Step 18: Click System in the setting menu. Click
Date &Time and set up the date and time.
NOTE: It is needed to set the following 3 parameters for manual mode:
IP Address: IP address;
Subnet Mask: Subnet mask;
Default Gateway: Default gateway;
Automatic display one parameter:
MAC Address: display MAC Address.
Step 20: Click Language to set language
4.2.4.2 Additional Function Setting
If you use Backup box, please set as below:
A.
___________________________________________________________________
EMS Introduction and Set up
Step 17: If you use UPS function, please set the
mute as YES in UPS System interface and the
relevant Frequency.
Step19: Click Ethernet to set the IP address.
DHCP mode means that setup IP address is set
up automatically.
If you want to set up the IP address manually,
please choose manual mode.
Step 21: Make sure all the following number is
correct.
Alpha ESS Co., Ltd.
Your Smart Energy
Page 55