Alpha ESS Storion-SMILE5 Installation, Operation & Maintenance Manual page 56

Your Smart Energy
Step 6: Check SOC Calibration function set No.
Step 8: Click the Grid Function to set up
relevant parameters about the grid
Step 10: Click Function-System Mode to set
system mode: DC, AC, Hybrid.
Step 12: If you want to use force charge, sett
Enable here.
Step 14: Set the UPS Reserve SOC, it means
how much battery energy to keep for UPS
function.
___________________________________________________________________
Page 54
EMS Introduction and Set up
Step 7: Check the Battery Ready function set
No. If you only use the inverter without battery,
please set it Yes.
Step 9: Set the Max. Feed in rate value.
Step 11: Click the mode then set up work
mode.(self-use or force time charge)
Step 13: Set the charge and discharge time.
Alpha ESS Co., Ltd.