Electrical Warnings - Aerotech ANT130L Series Hardware Manual

ANT130L Hardware Manual

Electrical Warnings

To decrease the risk of electrical shock, injury, death, and damage to the equipment, obey the
precautions that follow.
DANGER: Electrical Shock Hazard!
Stage motor phase voltage levels could be hazardous live.
l
Personnel are protected from hazardous voltages unless electrical interconnections,
l
protective bonding (safety ground), or motor/stage enclosures are compromised.
Do not connect or disconnect stage/motor interconnections while connected to a live
l
electrical power source.
Before you set up or do maintenance, disconnect electrical power.
l
It is the responsibility of the End User/System Integrator to make sure that stages are
l
properly connected and grounded per Engineering Standards and applicable safety
requirements.
It is the responsibility of the End User/System Integrator to configure the system
l
drive or controller within the Aerotech motor/stage electrical and mechanical
specifications.
www.aerotech.com
Electrical Warnings
9