Limits, Marker, And Machine Direction; Figure 3-3: Machine Direction - Aerotech ANT130L Series Hardware Manual

3.4. Limits, Marker, and Machine Direction

3.4. Limits, Marker, and Machine Direction
Aerotech stages are configured to have positive and negative "machine" directions. The machine
direction defines the phasing of the feedback and motor signals and is dictated by the stage wiring
(refer to Section
the stage. Programming direction is typically selectable in the controller, while machine direction is
hardwired in the stage.
Figure 3-3: Machine Direction
36
3.2.). Programming direction of a stage is set by the controller that is used to move
Figure 3-3 shows the machine direction of ANT130L stages.
ANT130L Hardware Manual
www.aerotech.com