Chapter 4: Maintenance; Service And Inspection Schedule - Aerotech ANT130L Series Hardware Manual

ANT130L Hardware Manual

Chapter 4: Maintenance

IMPORTANT: Read the
maintenance to the stage.
IMPORTANT: Keep the bearing area free of foreign matter and moisture or the
performance and life expectancy of the stage will be reduced.

4.1. Service and Inspection Schedule

Inspect the ANT130L at least once per month. The need for a longer or shorter inspection interval
will depend on the application and conditions, such as the duty cycle, speed, and environment.
Monthly inspections should include but not be limited to:
Visually inspect the stage and cables.
l
Re-tighten loose connectors.
l
Replace or repair damaged cables.
l
Clean the ANT130L and any components and cables as needed.
l
Repair any damage before operating the ANT130L.
l
Inspect and perform an operational check on all safeguards and protective devices.
l
www.aerotech.com
Safety Procedures and Warnings
Chapter 4: Maintenance
(on Page 7) before you do
39