Standard Version Applications; Hygienic Design Applications; Pump Name; Type Plate - GEA Hilge CONTRA I ADAPTA Operating Instructions Manual

Description
Description
3.2 Description
The pump is a end suction, single-stage centrifugal pump in system block design.
All wetted parts are based on the "hygienic design" guidelines. The material
grade 1.4404 or 1.4435 Fe ≤ 1% and the respective execution standard are
carried out according to the order and, if required, certified in writing
3.2.1

Standard version applications

The standard version of the pumps is used in the following areas:
–
–
–
–
–
–
–
3.2.2

Hygienic design applications

Due to the consistent hygienic design and the use of pore and porosity-free
materials, the pump is ideally suited for use in the following areas:
–
–
–
Special applications arise in the area of ultrapure water delivery/WFI, as well as
in equipment for the production of parenterals and infusion solutions according to
FDA.
3.3

Pump name

GEA Hilge pump name
GEA Hilge CONTRA
Pump name
3.4

Type plate

GEA Hilge
Niederlassung der GEA Tuchenhagen GmbH
Hilgestrasse - D - 55294 Bodenheim
Pump-Type:
Ser.-No.:
Q:
TAG No.:
YOM:
Fig.2:
18
Breweries (beer, wort, mash, yeast, etc.)
Dairies (milk, milk mixes, cheese production, etc.)
Soft drinks (fruit juice, lemonade, mineral water, etc.)
Wine and sparkling wine production
Distilleries (mash, distillates, etc.)
Food production (marinades, pickle, cooking oil, etc.)
Cleaning systems (CIP)
pharmaceutical industry
medical technology
in biotechnology process plants
Size / number
of stages
P:
H:
Made in Germany
Type plate GEA Hilge
I / 3 ADAPTA
Design type
n:
40/40 3
Output
Nominal width
[kW]
BA.10A.ADY.001.GB_1
2
Number of
poles
20.07.2018