GEA Hilge CONTRA I ADAPTA Operating Instructions Manual page 4

LAYOUT INFORMATION
Bullet points and numbered list characters
Bullet points are used to separate logical contents within a section:
•
•
Numbered list characters are used to separate enumerations within a
descriptive text:
Descriptive text with consecutive numbering:
–
–
Handling instructions
Handling instructions require you to do something. Several consecutive steps
result in a handling sequence that should be run in the specified order. The
handling sequence can be divided into separate steps.
Handling sequence
1.
2.
The subsequent handling sequence is the expected result:
®
Individual handling steps
Individual handling steps are marked thus:
–
4
Bullet point 1
Types of bullet point 1.
Bullet point 2
Types of bullet point 2.
Numbered list point 1
Numbered list point 2
Handling sequence step 1
–
step 1,
– step 2,
– step 3.
Handling sequence step 2
Result of the handling sequence.
Individual work steps
BA.10A.ADY.001.GB_1
20.07.2018