Eu Declaration Of Conformity For Machines - GEA Hilge CONTRA I ADAPTA Operating Instructions Manual

General

EU Declaration of Conformity for Machines

1.4 EU Declaration of Conformity for Machines
in accordance with the EC Machinery Directive 2006/42/EC, Annex II 1. A
Manufacturer:
We declare under our sole responsibility that the machine
Designation:
Model:
Type:
conforms with all the relevant provisions of this directive and the following directives:
Relevant EC directives:
Applicable harmonized
standards, in particular:
Remarks:
Person authorised for compilation and
handover of technical documentation:
Bodenheim, 26/03/2018
Michael Wulle
Managing Director
10
GEA HILGE
Office of GEA Tuchenhagen GmbH
Hilgestrasse 37-47
D 55294 Bodenheim Germany
Centrifugal pump
GEA Hilge CONTRA I/II
ADAPTA, ADAPTA-SUPER
2006/42/EC
EN 809:1998/A1+AC(D)
EN ISO 12100:2010
We also declare that the relevant technical documentation for
this machine has been prepared in accordance with Annex VII,
Part A, and agree to submit the documentation on justified
request of national authorities on a data carrier.
GEA HILGE
Office of GEA Tuchenhagen GmbH
Hilgestrasse 37-47
55294 Bodenheim Germany
EC Machinery Directive
p.p. Dr. Boris Kneip
Head, Development Dept. GEA Hilge
BA.10A.ADY.001.GB_1
20.07.2018