Installation instructions
3.5.8 Bleeding the booster pump
Bleeding of the booster pump must be performed when the dishwasher is started
up.
This is what you should do:
1.
2.
WD-90 DUO
Open the water connection to the dishwasher and wait until the dishwash-
er's break tank has filled with water.
Loosen the screw in the ventilation hole on the booster pump and release
any air. When water starts to run out of the ventilation hole, the screw is
tightened.
25
Rev. 2.0 (202204)
25-4-05-003