Wexiodisk WD-90 DUO Installation And User Manual page 91

Operating instructions
ALARM MESSAGE
(20)
FREQUENCY INVERTER
ERROR
CALL SERVICE
(16)
COMMUNICATION ERROR
FREQUENCY INVERTER
CALL SERVICE
(17)
ROTATION ERROR
ROTATING TABLE
PRESS RESET
(18)
OVERTEMPERATURE
FREQUENCY INVERTER
CALL SERVICE
(19)
DC BUS OVERVOLTAGE
FREQUENCY INVERTER
CALL SERVICE
(101)
HOOD SAFETY
PROTECTION ACTIVATED
(103) TIMEOUT WHEN
CLOSING HOOD
PRESS RESET
(102) TIMEOUT WHEN
OPENING HOOD
PRESS RESET
(31) TEMPERATURE
SENSOR ERROR
TANK B21
CALL SERVICE
(16)
COMMUNICATION ERROR
FREQUENCY INVERTER
CALL SERVICE
(33)
TEMPERATURE SENSOR
ERROR B42
CALL SERVICE
(35)
TEMPERATURE SENSOR
ERROR CONDENSOR B05
CALL SERVICE
(37)
LOW FLOW
DURING FINAL RINSE
PRESS RESET
(38) HACCP ALARM
NO FLOW
DURING FINAL RINSE
PRESS RESET
WD-90 DUO
ACTION
Contact service personnel!
Contact service personnel!
Contact service personnel!
Contact service personnel!
Contact service personnel!
Check that whatever caused the anti-crushing system to trip has been re-
moved. Reset the alarm by pressing the reset button. Restart the machine by
pressing the start button.
Reset the alarm by pressing the reset button. Contact service personnel if the
alarm recurs.
Reset the alarm by pressing the reset button. Contact service personnel if the
alarm recurs.
Contact service personnel!
Contact service personnel!
Contact service personnel!
Contact service personnel!
Check the water flow in the machine, e.g. that the water tap(s) are open, that
there are no problems with the water supply, etc. Reset the alarm by pressing
the reset button!
Check the water flow in the machine, e.g. that the water tap(s) are open, that
there are no problems with the water supply, etc. Reset the alarm by pressing
the reset button!
87
Rev. 2.0 (202204)