Wexiodisk WD-90 DUO Installation And User Manual page 80

Operating instructions
9.
10.
11.
12.
13.
14.
15.
16.
Once it has been cleaned, it is a good idea to leave the machine with the hood
open if no washing is due for a day, e.g. overnight.
WD-90 DUO
If the machine is equipped with a drain pump (option), this is started by
pressing the button for normal wash (2).
Unhook the level pipe (1) from its holder, give it a quarter turn and leave it
positioned in the waste pipe. There should now be a slight chink between
the bottom of the tank and the rubber sleeve to allow the water to run out.
When the tank is empty, remove the level pipe (1), clean and check that the
foam separator (2) is not stuck and can move.
2
1
Clean the inside of the tank and also the dividing wall in the tank.
Cleaning the level sensors (2) in the tank. Check the operation of the float
on the level sensor. This should move freely and must not jam.
Cleaning the initial rinse pipes
Clean the inside of the hood, etc.
Clean the wash accessories for the machine, such as baskets, etc.
76
3
25-4-03-005
2
3
1
daglig_r
Rev. 2.0 (202204)