Positioning The Machine - Wexiodisk WD-90 DUO Installation And User Manual

Installation instructions

3.4.2 Positioning the machine

Check the following points before the machine is placed in position:
•
•
•
•
•
Put the machine in position and check that the machine and any accessories are
horizontal using a spirit level. Place the spirit level on the join between the ma-
chine tank and the upper part. Adjust the height with the legs.
Check with a spirit level that the machine is horizontal
Once the machine has been filled with water, do another check to make sure the
machine is horizontal.
WD-90 DUO
Check that the fuse for the machine at the site is off, blocked and that out-
going electrical circuits from the machine are non-live.
Remove the protective plastic on the sides which are to be stood against a
wall.
Undo the hose for detergent on the back of the machine. Hang the hose up
so that it can be easily accessed by the detergent supplier.
Put the machine in position, the distance between the wall and the machine
should be at least 100 mm.
Check that the gap between the hood and bottom section is approximately
5 mm around machine.
15
25-4-00-014
Rev. 2.0 (202204)