Documentation - Wexiodisk WD-90 DUO Installation And User Manual

Installation instructions
4. Run a number of washes complete with dishware and check:
•
•
•
•
•
•
•
6. Final check: Empty the machine and turn off the power using the power
switch.
•
•
•
7. Train and inform personnel concerning:
•
•
•
•

3.8 Documentation

For correct use and servicing, it is essential that the documentation accompany-
ing the machine is made available to personnel who will be using the machine.
The installation and user manual, which describes handling and care among oth-
er things, should be stored near the machine.
WD-90 DUO
There are no water leaks
The hood's switch, anti-crushing system and automatics are working
The water temperatures are maintained
The dishware is clean
N.B.: If the machine is equipped with detergent dosing, this function is
roughly set at the factory; contact your chemical supplier for a more precise
setting.
The dishware is dry
N.B.: If the machine is equipped with drying agent dosing, this function is
roughly set at the factory; contact your chemical supplier for a more precise
setting.
There is adequate water flow to the machine. Inform the customer if the wa-
ter flow and / or the water pressure are too low
The motor cut-off switch setting against the wiring diagram
Re-tighten all connections on contacts and any circuit breakers
Set all the circuit breakers to the ON position
Display the maintenance instructions supplied with the machine.
Washing
Care (daily, weekly and other frequencies)
Recommendation for annual service
Wexiödisk's original granules must be used (warranty conditions).
43
Rev. 2.0 (202204)