Components - Safety Vision ICOP PRO HD HVR User Manual

13

Components

1 - Beep/Vibration Switch
to toggle notifications.
• BEEP: Audible beeps sound
• VIB: Unit is silent, vibrates for notifications
• OFF: Disables all sound and vibration notifications,
observe status LEDs for unit status
2 - Power Switch
Use the Power Switch to turn the
microphone on and off.
3 - Record Button Use the Record button to start and stop
video recordings:
1. Remove the microphone from the cradle and
ensure the power switch is in the ON position.
2. Press the Record button once to begin recording.
The In-USE status LED displays green.
3. Press the Record button once more to conclude
recording. The In-USE status LED turns off.
4. Replace the microphone in the cradle when not
in use or when the battery is low.
ICOP PRO HD HVR USER GUIDE
Use the Beep/Vibration Switch 4 - Status LEDs The In-USE and Low Batt LEDs display the
microphone's current status:
In-USE (green):
• Solid: Video and audio is recording
• Flashing: Microphone is close to going out of range
of the receiver
Low Batt (red):
• Solid: Battery is low, return the microphone to the
cradle to recharge
• Flashing: Voice recording is muted
5 - Mute Button Press the Mute button once during a
recording to mute voice recording (Low Batt status LED
flashes red). Press the Mute button once more to un-mute
voice recording.
6 - Ext. Microphone Port Attach an external lapel
microphone using a 2.5 mm connector.