Video - Safety Vision ICOP PRO HD HVR User Manual

Video

Video Loss
• Select the Video Loss option to enable video loss
alarms. An alarm is triggered whenever video loss
or camera failure is detected.
• Alarm type: Select either Sensor (When a Sensor
alarm is triggered, it is recorded in video as metadata
only), or Event (When an Event alarm is triggered, it
marks recorded video as 'Alarm Video' with metadata
included).
• Trigger: Tap the Setup button to configure the
parameters specific to this type of alarm (see
Trigger Setup below)
• Linkage: Tap the Setup button to configure the
recording, monitor display and additional options
specific to this type of alarm (see Linkage Setup below)
Then tap the Save button.
Trigger Setup
Tap the Setup button under the Trigger field to display
the setup screen to configure the parameters specific to
the Video Loss Alarm.
• Channel: Select which channels the Video Loss
alarm will be applied to
• Effective Time: Enter the time (between 0 and
10 seconds) that the alarm is effective (select the
Question Mark icon for more details)
Then tap the OK button.
Then tap the Save button.
ICOP PRO HD HVR USER GUIDE 52