Startup - Safety Vision ICOP PRO HD HVR User Manual

25

Startup

ON/OFF
• ON/OFF mode:
◦ Select Timer to power the recorder on and off
as
set specific times
◦ Select Ignition to power the recorder on and
off
with the vehicle's ignition
◦ Select Ignition or Timer to power the recorder
on during both conditions
• Shutdown Delay: Enter the amount of time, in
seconds, that the recorder will wait to shut down after
the vehicle's ignition has been turned off
• Shutdown Record: Enter the amount of time, in
seconds, that the recorder will continue to record
after the vehicle's ignition has been turned off
• Timer From: Enter the exact times each day the
recorder powers up and powers down when using
the Timer ON/OFF mode
• Monitor mode:
◦ Select Automatic Power Up to turn the touch
screen monitor on automatically with the
recorder
◦ Select Auto-Standby to leave the touch screen
monitor in standby mode (must be touched to
activate) when the recorder is powered on
Then tap the Save button.
Sleep
• Low volt protect: Select this option to
automatically shut down the recorder when the
power it receives drops below the specified voltage
• Shutdown Voltage: Enter the minimum voltage,
in volts, that the recorder can receive before it
automatically disconnects from the DVMS PRO
server or shuts down
• Start Up Voltage: Enter the minimum voltage, in
volts, that the recorder must be receiving before
starting up
• Upload to Server: Select this option to allow the
recorder to continue to upload data to a DVMS PRO
server while under voltage protection
Then tap the Save button.
ICOP PRO HD HVR USER GUIDE