Components - Safety Vision OBSERVER 4100 HVR User Manual

OBSERVER 4100 HVR HARDWARE USER GUIDE
4

Components

1 - USB Port
- Insert a USB flash drive to download events
quickly without having to remove the Secure Digital (SD)
card.
2 - External Monitor Output
monitor to the Observer 4100 with an RCA plug here to
configure the mobile digital video recorder (MDVR).
3 - IR Receiver
- Receives signals from the included remote
control for configuration.
4 - Removable SD Card Cannister
primary and mirror SD cards in a secure container.
5 - Door Lock
- The Door Lock secures the door over the
SD card slot for security.
6 - Removable Hard Drive
provides the main storage for recorded data.
7 - Status LEDs
- The Status LEDs illuminate to display the
current status of the Observer 4100.
- Attach an external
- Includes both the
- The hard disk drive (HDD)
STATUS LEDS
Flashes when HDD is being accessed
HDD
Flashes when SD card is being accessed
SD
Solid - GPS searching for signal/Flashing - GPS has locked on
GPS
NET HVR is connected to a network
HTR Internal heater is active
Power HVR is receiving power
REC HVR is recording video
VLoss One or more cameras is detached or malfunctioning
ALM Event/alarm has occured
ERR Storage Error - corrupted driver or unformatted drive