Upgrade; Storage; Reset - Safety Vision ICOP PRO HD HVR User Manual

61

Upgrade

The Upgrade menu allows you to update the recorder's
firmware.
Note: Any previously exported configuration files will need
to be re-exported after updating the firmware.
1. Obtain the firmware upgraded file from Safety Vision
technical support.
2. On an otherwise blank USB flash drive, place the
firmware upgrade file in a folder titled upgrade in
the root directory.
3. Insert the flash drive into the USB port on the front
panel of the recorder and tap the Upgrade icon
next to Device upgrade (to upgrade the recorder's
firmware), CP4 Upgrade (to upgrade the touch screen
monitor's firmware), or IPC upgrade (to upgrade any
connected IP cameras).
The firmware upgrade process begins automatically.
Make sure recorder maintains constant power while upgrading
firmware.

Storage

The Storage menu is used to format storage devices
connected to the recorder and displays the ratio of free
and total space available for each.
To format a device, tap Format.
Formatting a device erases all data, including
recorded video. Use with caution.

Reset

The Reset menu allows you to reset the recorder's entire
configuration to the factory default settings. To reset all
settings, tap the Default button.
Resetting a recorder erases all settings. Use with
caution.
Tap the Reboot button to reboot the recorder.
ICOP PRO HD HVR USER GUIDE