Ptz - Safety Vision ICOP PRO HD HVR User Manual

PTZ

The PTZ tab allows you to configure the capabilities
of any optional PTZ (pan-tilt-zoom) equipped cameras
attached. For each attached PTZ camera, configure the
following:
• Channel Enable: Select this option to enable PTZ
functions
• Operate: Select Serial, N9N, or ONVIF
• Protocol Type: Select Pelco-D or Pelco-P
• Addr: Enter the numbered address of the camera
• Test: Tap this button after configuration to display
a PTZ control menu to ensure operation is correct
Then tap the Save button.
ICOP PRO HD HVR USER GUIDE 40