Alarm - Safety Vision ICOP PRO HD HVR User Manual

45

Alarm

The Alarm menus configure the various alarms and their
triggers.
Base
Speed Alarm
• Select the Overspeed option to enable speed
alarms. An alarm is triggered when the configured
speed is exceeded.
• Alarm type: Select either Sensor (When a Sensor
alarm is triggered, it is recorded in video as metadata
only), or Event (When an Event alarm is triggered, it
marks recorded video as 'Alarm Video' with metadata
included).
• Trigger: Tap the Setup button to configure the
parameters specific to this type of alarm (see
Trigger Setup below).
• Linkage: Tap the Setup button to configure the
recording, monitor display and additional options
specific to this type of alarm (see Linkage Setup below).
Then tap the Save button.
Trigger Setup
Tap the Setup button under the Trigger field to display
the setup screen to configure the parameters specific to
the Speed Alarm.
• Early difference: Enter the MPH difference from
the MPH entered in the Speed field that the
vehicle can deviate from before an alarm occurs
• Speed: Enter the maximum speed in MPH that
can be obtained by the vehicle before an alarm is
triggered
• Duration Time: Enter the time (between 0 and 255
seconds) that the alarm records
• Effective Time: Enter the time (between 0 and 10
seconds) that the alarm is effective (select the Question
Mark icon for more details)
• TTS Voice: Select this option to enable voice alerts
that will announce the alarm through the monitor
speaker when triggered
Then tap the OK button.
Then tap the Save button.
ICOP PRO HD HVR USER GUIDE