Data Setup; General - Safety Vision ICOP PRO HD HVR User Manual

41

Data Setup

The Data Setup menus configure how the recorder
communicates with external devices.

General

Sensor
The Sensor tab configures the sensor inputs connected
to the sensor harness
• Sensor number: Select a sensor in the Sensor
number field to configure
• Sensor name: Enter an alphanumeric name for the
selected sensor
• OSD Name: Enter an alphanumeric name for the
selected sensor that will appear on the on-screen
display when the sensor is active
• People counting: Under development
Then tap the Save button.
Serial Port
The Serial Port tab configures which devices are
connected to the serial port. For each connection, select
which device is connected (None, Extend, Control Panel,
485 BUS, External GPS, 3Axis ACC, Green Driver, PTZ) and
the frequency for each.
Then tap the Save button.
Speed
• Unit: Select speed to be calculated in MPH or
KM/H
• Source: Select the source of the vehicle's speed
data.
◦ Satellite: GPS
◦ Pulse: Under development
Then tap the Save button.
ICOP PRO HD HVR USER GUIDE