Ipc Setup - Safety Vision ICOP PRO HD HVR User Manual

39

IPC setup

The IPC Setup tab allows you to configure a number of IP
camera networks. (This menu is only configurable when
an IP camera is connected to the recorder.)
• Select Enable for the channel you would like to
use.
• Tap the Search icon (magnifying glass) to search
for available IP cameras.
The IPC search screen appears
• In the IPC search screen, select an available camera
and tap OK
• Tap on the Setup icon for each network
The Network Setup screen appears
• Enter the following for each network:
◦ Channel
◦ Protocol Type
◦ IP address
◦ Port
◦ Username
◦ Password
41H series IP cameras: leave the Username and Password
fields blank.
Gen 3 (60-32000X [Exterior] and 60-20000X [Interior]):
enter Admin in the username field and 1234 in the
password field.
45 and 46 series IP cameras: enter admin in the username
field and SV123456 in the password field.
Note - Gen 2, Gen 3, 45 and 46 series IP cameras
require an assigned IP address. Suggested IP schemes
to assign the IP cameras:
10.100.100.101
10.100.100.102
10.100.100.103
10.100.100.104
Tap the last three digits of the Local address to enter
these numbers manually.
Then tap the Save button.
ICOP PRO HD HVR USER GUIDE