Components - Safety Vision Observer 4000 User Manual

2

Components

1 - IR Remote Sensor
- The IR Remote Sensor receives
signals from the DVR Remote Control.
2 - Status LEDs
- The Status LEDs illuminate to display
the current status of the DVR. See chart at left.
3 - USB Port
- Insert a USB flash drive to download events
quickly without having to remove the SD card or hard drive,
or upload firmware updates.
4 - SIM Card Slot
- Not used.
5 - Primary SD Card Slot
slot until it clicks. To remove the SD card, briefly press it in
until it ejects.
6 - Mirror/Secondary SD Card Slot
card into the slot until it clicks. To remove the SD card,
briefly press it in until it ejects. This SD card can be used for
mirror recording or as a secondary storage device once the
primary SD card is full.
OBSERVER 4000 USER GUIDE
OBSERVER 4000 USER GUIDE
- Insert an SD card into the
- Insert an SD
STATUS LEDS
REC DVR is recording video
PWR DVR is receiving power
ERR Error may have occured
One or more cameras is detached or malfunctioning
VLOSS
Solid - GPS searching for signal/Flashing - GPS has locked on
GPS
Event/alarm has occured
ALM
For further information regarding
the configuration of the DVR, see the
Configuration section.