Advanced - Safety Vision ICOP PRO HD HVR User Manual

57

Advanced

ACC Alarm
• Select the ACC alarm option to enable ACC alarms.
An alarm is triggered due to shock detected by an
accelerometer
• Alarm type: Select either Sensor (When a Sensor
alarm is triggered, it is recorded in video as metadata
only), or Event (When an Event alarm is triggered, it
marks recorded video as 'Alarm Video' with metadata
included).
• Trigger: Tap the Setup button to configure the
parameters specific to this type of alarm (see
Trigger Setup below)
• Linkage: Tap the Setup button to configure the
recording, monitor display and additional options
specific to this type of alarm (see Linkage Setup below)
• Calibrate: Tap the Calibrate button while the recorder
is still to reset the accelerometer readings to 0.0.
Then tap the Save button.
Trigger Setup
Tap the Setup button under the Trigger field to display
the setup screen to configure the parameters specific to
the ACC Alarm.
• Tap in each of the X, Y, and Z fields and enter a
threshold (between 0 and 9.9 Gs) for each direction
which when exceeded triggers the alarm
• Effective Time: Enter the time (between 0 and
10 seconds) that the alarm is effective (select the
Question Mark icon for more details)
Then tap the OK button.
Then tap the Save button.
ICOP PRO HD HVR USER GUIDE