Automatic Recording Start By External Tc [Recin Via Exttc]; Automatic Recording Start By External Tc - Fostex PD204 Owner's Manual

Chapter 8: MENU mode/TC SETUP menu

Automatic recording start by external TC [Recin via ExtTC]

Using the "Recin via ExtTC" item, you can select whether or not the unit automatically starts
recording when it receives external time code.
By setting this item to "On" (the default is "Off") and setting the "Gen mode" item in the "TC
SETUP" mode to "Ext Run (External Run)", the unit automatically starts recording when the unit
receives external time code whose frame rate matches the frame rate setting of the PD204.
<Note>: In order to start recording automatically when the unit receives time code, the
frame rate setting of the unit match the external time code frame rate. Before you attempt
to make recording, make sure that the both frame rates are the same.
1) When the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the
[TIME/TC SET] key.
The display now shows the TC SETUP menu screen.
2) Use the [MENU] dial to select the "RecIn via ExtTC" menu item, and press the [ENTER/YES] key.
The current setting starts flashing and you can now select "On" or "Off".
3) Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm
your setting.
On
Off
4) Press the [EXIT] key repeatedly until you exit the MENU mode.
188
Location Recorder Model PD204
You can select from among "On" and "Off" (the default is "Off").
When the unit receives external time code whose frame rate matches the frame setting
of the unit, the unit automatically starts recording.
When the unit receives external time code whose frame rate matches the frame setting
of the unit, the unit does not automatically start recording.
Options
Flashing