Project Name Setting [Set Project Name]; Project Name Setting - Fostex PD204 Owner's Manual

The "Set project name" menu item sets the project name recorded to an iXML file.
1) While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the
[ENTER/YES] key.
2) While "SYS SETUP" is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
3) Use the [MENU] dial to select the "Set project name" menu item and press the [ENTER/YES]
key.
The display now shows the screen for entering a project name.
4) Use the [MENU] dial or alphanumeric keys entering the desired project name, press the
[ENTER/YES] key to confirm your setting.
Use the [
when the cursor is pointing any character of the name, you can clear the whole
name.
The project name is stored to the Flash ROM of the unit, while recorded to an iXML
file.
Characters you can enter using the [MENU] dial
Alphabetical characters
Numerical characters
Symbols
Characters you can enter using the alphanumeric keys
Alphabetical characters
Numerical characters
Symbols
5) Press the [EXIT] key repeatedly until you exit the MENU mode.

Project name setting [Set project name]

]/[ ] keys to move the cursor position. By pressing the [CLEAR] key
: A ~ Z, a ~ z
: 0 ~ 9
: !, #, $, %, &, ', (, ), +, -, ., /, =, @, [, ], ^, _, ->, <-, space
: A ~ Z, a ~ z
: 0 ~ 9
: !, #, $, %, &, ', (, ), +, -, ., /, =, @, [, ], ^, _, space
Chapter 8: MENU mode/SYS SETUP menu
Location Recorder Model PD204
Flashing
137