Maximum File Length Setting [Max File Length]; Maximum File Length Setting - Fostex PD204 Owner's Manual

Location recorder
Hide thumbs Also See for PD204:
Table of Contents

Advertisement

Chapter 8: MENU mode/SYS SETUP menu

Maximum file length setting [Max file length]

The "Max file length" menu item sets the maximum recording volume of a file.
This setting is important especially for exporting audio file data of the unit to your PC, because
each PC has the limitation of the volume of a file to be imported.
The setting is stored to the Flash ROM of the unit.
1)
While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the
[ENTER/YES] key.
2)
While "SYS SETUP" is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
3)
Use the [MENU] dial to select the "Max file length" menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
4)
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm
your setting.
5)
Press the [EXIT] key repeatedly until you exit the MENU mode.
<Note>:
The remaining recordable time of the file which is shown during recording
is calculated based on the "Max file length" setting. For example, if the remaining
space of the disk is 4GB or more while "Max file length" is set to 4GB, the remaining
recordable time of the file is calculated based on 4GB. If the remaining space of the
disk is smaller than the "Max file length" setting, the remaining recordable time of
the file is calculated based on disk remaining space. For example, if "Max file length"
is set to 4GB while the remaining space of the disk is 2GB, the display shows the
remaining time which is calculated based on 2GB.
<Note>:
If the current file reaches to the maximum length during recording, the unit
automatically create a new file and continues recording to it. During recording to an
internal hard disk partition when the "Auto part. link" menu item (described on the
next page) is set to "On", if there is no more recording space left in the current
partition, the unit automatically continues recording to the next partition. See page
154 for details.
152
Location Recorder Model PD204
Selectable between "2GB" and "4GB" (the default is "2GB").
Options
Flashing

Advertisement

Table of Contents
loading

Table of Contents