Preparation Of Power Supply - Fostex PD204 Owner's Manual

Chapter 2: Preparation before using the PD204
The unit can operate on the mobile IDX ENDURA or NP-1 type battery, as well as the dedicated
AC adaptor.
IDX ENDURA battery
<Note>: The IDX ENDURA battery, NP-1 type battery (including the holder and holder
plate) and AC adaptor are not included with the unit. For the information about the
AC adaptor, ask your dealer or the nearest FOSTEX service station.
<Note>: In general, a battery is not charged when shipped. Therefore, before using
the battery, you must charge it according to the manual of the battery (note that the
PD204 does not provide the battery charge function). Also note that you must handle
the battery correctly according to the manual of the battery.
<Note>: You can mount the NP-1 battery housed in the dedicated holder to the
PD204 without any special parts, however, the holder projects from the PD204 body.
If you want to mount the NP-1 battery housed in the dedicated holder to the PD204
without projecting from the PD204 body, the optional mounting hardware (Model
EX-BP1) is needed. Ask your dealer or the local Fostex service station for installing
the mounting hardware. The mounting hardware must be installed by Fostex service
station.
* IDX, IDX (logo), ENDURE, V-Mount, V-Plate, Digi-View and i-Trax are the trademarks of IDX Company Ltd..
22
Location Recorder Model PD204

Preparation of power supply

Dedicated AC adaptor (optional)
NP-1 type battery
Holder and holder plate for the NP series