Fostex PD204 Owner's Manual page 109

5) Use the [MENU] dial to select the "Copy mode" item and press the [ENTER/YES] key.
The display shows the "---CAUTION---" message on which "Are you sure?" flashes, as
shown below. In the bottom of this message screen, the approximate time required for
disk copy is shown.
<Note>: You cannot select the disk copy destination to the same medium as the copy
source. If you do so, the display shows "Void!" and returns to the screen for selecting
the copy destination medium.
6) If you are sure, press the [ENTER/YES] key.
The PD204 starts disk copy to the selected destination medium.
During disk copy, the display shows estimated time and space remaining progress
indication for disk copy. When disk copy completes, "Completed!" is shown on the
display and the PD204 stops disk access.
7) Pressing the [EXIT] key repeatedly to exit the MENU mode.
Chapter 6: Advanced operations
Location Recorder Model PD204
Flashing
109