Fostex PD204 Owner's Manual page 47

12.
CLEAR
13.
PRE REC
ON
OFF
14.
FILE
PREV CUE NEXT
15.
JAM
16.
CUE
[CLEAR] key
Pressing this key functions in the following manners.
• While entering characters:
Erases the next character on the right of the cursor position.
• While editing time data:
Clears time data and sets it to "00h 00m 00f 00sf".
• While the "Peak hold" setting menu in the Setup mode is set to " ":
Resets the peak level indication on the level meters.
• While a warning popup window is shown:
Dismisses the popup window.
[PRE REC] switch
When this switch is set to "ON", recording starts from audio data stored
in the buffer (see page 87). The buffered time can be set using the "Pre
rec time" menu item in the "SYS SETUP" menu of the MENU mode (see
page 151).
[ / PREV] and [ / NEXT] keys
These keys have primary (unSHIFTed) and secondary (SHIFTed)
functions.
• When unSHIFTed:
• Pressing the [ / PREV] or [
previous or next audio file. You can skip to "ABS 0" of the desired audio
file by pressing the appropriate key as many times as required.
• While editing time or a label in the edit mode, pressing the [
or [ / NEXT] key moves the cursor to right or left.
• When SHIFTed:
Pressing the [ / PREV] or [
next cue point. You can skip to the desired cue point by pressing the
appropriate key as many times as required.
[JAM] switch
Used to execute the jamming function (see page 92).
When this switch is set to "ON" and the PD204 is receiving external time
code, the internal time code generator takes over (jams) time code.
Note that the jamming function is only available when the TC generator
mode is set to "Free Run". Depending on the setting of the "JAM mode"
menu item in the TC SETUP menu of the MENU mode, the PD204 also
jams the time code user bits (see page 182).
[CUE] key
This key functions as follows depending on the recorder condition.
• During recording:
By pressing this key during recording, the current position data is stored
as a cue point "on the fly". The data is entered into the next available cue
point (see page 93).
• In any condition except during recording:
Pressing this key brings up the cue point list. While the cue point list is
shown, you can check the cue points which hold data, as well as can
locate to the desired cue point, edit the cue point data and performs cue
point entry (see page 93).
Location Recorder Model PD204
Chapter 3: Names and Functions
/ NEXT] key skips to "ABS 0" of the
/ NEXT] key skips to the previous or
/ PREV]
47