Table of Contents
Advertisement
Using the "LOAD SETUP" menu item, you can load setup data from among user setup data ("Box
No 0" through "Box No6") and default setup data.
A user setup data can be saved using the "SAVE SETUP" menu (described on next page).
1)
While the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the
[ENTER/YES] key.
2)
Use the [MENU] dial to select the "LOAD SETUP" menu and press the [ENTER/YES] key.
The display now shows the LOAD USER SETUP screen for selecting a desired user (or
default) setup box.
3)
Use the [MENU] dial to select the desired box and press the [ENTER/YES] key.
The data is immediately loaded.
After "Completed!" is shown, the display returns to show the MENU list screen.
<Note>:
If you select "[Default setup]" and the default setup data is loaded, all
settings in the "SYS SETUP" menu are initialized. If you select and load any user box,
the saved settings are loaded.
4)
Press the [EXIT] key repeatedly until you exit the MENU mode.
LOAD SETUP menu
Chapter 8: MENU mode/LOAD SETUP menu
Location Recorder Model PD204
207
Advertisement
Chapters
Table of Contents
