Fostex PD204 Owner's Manual page 148

Chapter 8: MENU mode/SYS SETUP menu
Use the [MENU] dial to select a desired option and press the [ENTER/YES] key to confirm
your setting.
Selectable between "Off", "TONE" and "4POP TONE" (the default is "Off").
Off
TONE
4 POP TONE
• End pop tone setting
Use the [MENU] dial to select the "End pop tone" and press the [ENTER/YES] key.
The current setting starts flashing.
Use the [MENU] dial to select a desired option and press the [ENTER/YES] key to confirm
your setting.
On
Off
4) Press the [EXIT] key repeatedly until you exit the MENU mode.
148
Location Recorder Model PD204
No slate or pop tone is recorded.
The slate tone at 1kHz is recorded for the duration set by "Tone rec time".
The pop tone at 1kHz is recorded. The cycle of 0.5 sec tone and 0.5 sec mute recording
is made four times repeatedly.
Selectable between "On" and "Off" (the default is "Off").
The 1kHz pop tone is recorded at the end of recording.
The 1kHz pop tone is not recorded at the end of recording.
Options
Options
Flashing