Monitoring Recording Signals - Fostex PD204 Owner's Manual

Monitoring recording signals

You can monitor recording signals via headphones or the internal monitor speaker.
While a plug is inserted to the [PHONES] jack, the internal speaker automatically turns off,
and you can monitor the signals only via headphones.
The monitor level can be adjusted by the [MONITOR] control. This control can be pushed-
lock. By pushing down the control, you can put it down to the panel height level. By pressing
the control again, it comes out and you can rotate the control to adjust the level.
<Note>: By default, the internal monitor speaker is automatically muted during record-
ing. You can select on or off of this mute function via the "Speaker mute" item in the
"SYS SETUP" menu of the MENU mode (see page 159).
Monitor select dial
[MONITOR] control
[PHONES] jack
Depending on the settings of the monitor select dial, you can monitor the sound as shown on
the table below.
ST
MONO
L/M
R/S
M/S
L: BUS MS L, R: BUS MS R
For the future expansion. No monitor signal is assigned on this version.
C1
For the future expansion. No monitor signal is assigned on this version.
C2
AUX
By pressing any of the [PFL/SEL] keys on channels 1 through 4, you can monitor Pre-fader
listen of the corresponding channel(s).
POWER
ON
OFF
AUX
C2
C1
MS
MONITOR
MIN MAX
PHONES
Record
L: BUS L, R: BUS R
BUS L+R (MONO)
BUS L (MONO)
BUS R (MONO)
L: AUX L, R: AUX R
[PFL/SEL] keys
Chapter 5: Recording/Playback
QUICK SET TIME FILE SEL LIGHT EXIT
SHIFT TC SET DRV,PAT CONTRAST BATT
ST
ACCESS
MONO
L/M HDD
R/S
PD204 LOCATION RECORDER
Playback
L: ST L, R: ST R
ST L+R (MONO)
ST L (MONO)
ST R (MONO)
L: ST MS L, R: ST MS R
L: AUX L, R: AUX R
Location Recorder Model PD204
space
ENTER
YES
1
GHI
MENU
4
PQRS
DVD
7
83