Sys Setup Menu - Fostex PD204 Owner's Manual

Chapter 8: MENU mode/SYS SETUP menu
In the SYS SETUP menu, the following menu items for settings regarding recording/playback
are available. You can save setting data using the "SAVE SETUP" menu and recall the saved data
whenever you want (see pages 207 and 208).
For the "Auto copy" and "Adjust RTC" menu items in the SYS SETUP menu, see
<Note>:
pages shown below.
Menu item
Set project name
Default file name
Default TrkName
Next event No
Record FS & Bit
Pull up/down
Auto copy
Digital out
Diagnoses
Peak hold
Tone rec mode
Pause time
Keyboard Sel
Pre rec time
Max file length
Auto part. link
False start
Limiter parameter
Stereo out level
Speaker mute
Error tone
Chain play
Adjust RTC
Version
136
Location Recorder Model PD204

SYS SETUP menu

Edits a project name recorded to an iXML file.
Edits the default file name of an audio file created when recording.
Edits the default track name of a BWF file created when recording.
Sets the event number in the description information of an audio file.
Selects the Fs and bit length of the audio file created when recording.
Selects pull up/down setting when using the internal clock reference.
Selects the auto copy mode which enables simultaneous recording to a DVD-RAM
disk when making recording to a hard disk partition (see page 104).
Selects the digital output audio format.
Selects whether or not creating a diagnoses file which logs errors during recording, etc.
Sets the peak hold time of the bargraph meters.
Sets the recording time and mode of the slate tone.
Sets the pause cancel time.
Selects the type of a USB keyboard connected to the [USB KYBD] connector.
Sets the pre recording time of audio pooled in the buffer.
Sets the maximum recording volume of a file.
Sets on/off of the auto partition link function.
Selects the false start mode.
Sets the limiter parameters.
Selects the output reference level of the [ANALOG OUT] connectors.
Selects on/off of muting the internal speaker when the unit is not in playback mode.
Selects whether or not the unit outputs the warning tone for four types of conditions.
Selects how the recorder behaves after it finishes playback of an audio file.
Adjusts the internal realtime clock (see page 31).
Shows the system version of the unit.
Contents