Fostex PD204 Owner's Manual page 154

Chapter 8: MENU mode/SYS SETUP menu
To make continuous recording, the next partition to the current partition must
<Note>:
have enough recordable space. It is recommended that no recording has been made to the
next partition before making continuous recording.
The following shows how continuous recording is made depending on the setting of the
"Max file length" item in the "SYS SETUP" menu of the MENU mode.
It is assumed to attempt to record 6GB audio data to partition 1 (PT01) with "Auto part.
link" set to "On".
• When "Max file length" is set to "4GB":
Data is record to "4GB" and "0.5GB" files on partition 1 (PT01), and the rest 1.5GB
data is recorded to a file on partition 2 (PT02). (The created files have sequential
file numbers.)
4GB
SCENE_001.wav
• When "Max file length" is set to "2GB":
Data is record to two "2GB" and a "0.5GB" files on partition 1 (PT01), and the rest
1.5GB data is recorded to a file on partition 2 (PT02). (The created files have
sequential file numbers.)
2GB
SCENE_001.wav
If data is too large for two partitions, partition 3 (PT03) is used.
If the next partition does not have recordable space, recording ends.
If "Auto part link" is set to "Off", continuous recording is not made.
154
Location Recorder Model PD204
Partition 1 (P01)
0.5GB
SCENE_002.wav
Partition 1 (P01)
2GB 0.5GB
SCENE_003.wav
SCENE_002.wav
Partition 2 (P02)
1.5GB
SCENE_003.wav
Partition 2 (P02)
1.5GB
SCENE_004.wav